FluxapyroxadTechnical material and formulations from China
Huasheng supplies Fluxapyroxad from China as technical material and SC and FS formulations (3 specifications), with technical and registration documents and private label packaging for your market.
At a glance
- CAS number
- 907204-31-3
- Molecular formula
- C₁₈H₁₂F₅N₃O (381.3 g/mol)
- PubChem record
- CID 16095400
- Mode of action group
- FRAC 7
- Chemical class
- Pyrazole carboxamide (SDHI) fungicide
- Offered as
- Technical material · Single active
- Formulations
- TC · SC · FS (3 specifications)
Formulations & concentrations
Technical materials, single active formulations and mixtures are listed separately, each with its declared content and the tolerance set by the FAO/WHO specification manual. Specifications added to the enquiry list can be sent together with other products in one purchase or registration enquiry.
Technical materials
Technical material for formulators. Each specification states the assay, relevant impurities and test methods.
Single active formulations
Finished formulations of a single active ingredient, packed and labelled for the destination market.
Approved uses differ by country; the label registered in the destination market applies.
Quality specification
Each specification is supplied to the quality clauses that the FAO/WHO specification manual sets for its formulation type, tested by CIPAC methods. The batch certificate of analysis reports the measured values.
Technical material (TC)
| Property | Requirement | Method |
|---|---|---|
| Active ingredient content | Not less than the declared minimum, with no upper limit | CIPAC |
| Identity | Confirmed by an identity test | CIPAC |
| Relevant impurities | Within the limits of the FAO specification for the active ingredient, where one exists | CIPAC |
| Water, insolubles and acidity | Stated where the specification of the active ingredient requires them | MT 30.6 · MT 191 |
Suspension concentrate (SC)
| Property | Requirement | Method |
|---|---|---|
| Active ingredient content | Declared content within the FAO/WHO tolerance shown for each specification | CIPAC |
| Pourability | Residue ≤ 5% | MT 148.2 |
| Spontaneity of dispersion | ≥ 60% after 5 min in CIPAC water D | MT 160.1 |
| Suspensibility | 60 to 105% after 30 min in CIPAC water D | MT 184.1 |
| Wet sieve test | ≤ 2% retained on a 75 µm sieve | MT 185.1 |
| Persistent foam | ≤ 60 mL after 1 min | MT 47.3 |
| Stability at 0 °C | After 7 days at 0 ± 2 °C, still within the suspension and sieve limits | MT 39.3 |
| Stability at elevated temperature | After 14 days at 54 ± 2 °C, active ingredient ≥ 95% of the initial content and physical limits still met | MT 46.4 |
Flowable concentrate for seed treatment (FS)
| Property | Requirement | Method |
|---|---|---|
| Active ingredient content | Declared content within the FAO/WHO tolerance shown for each specification | CIPAC |
| Colouring | Contains a colouring agent, as required for seed treatments | |
| Pourability | Residue ≤ 5% | MT 148.2 |
| Wet sieve test | ≤ 2% retained on a 75 µm sieve | MT 185.1 |
| Adhesion to seed | Minimum declared in the product specification | MT 194 |
| Stability at 0 °C | After 7 days at 0 ± 2 °C, still within the suspension and sieve limits | MT 39.3 |
| Stability at elevated temperature | After 14 days at 54 ± 2 °C, active ingredient ≥ 95% of the initial content and physical limits still met | MT 46.4 |
Shelf life: two years from release under the storage conditions on the label, unless the label states otherwise. Specifications revised: .
FAO/WHO Manual on the development and use of FAO and WHO specifications for chemical pesticides, 3rd edition (2025) ↗Shipping, packaging and supply terms
Classification, transport and customs
- EU harmonised classification
- Lact.; Aquatic Acute 1; Aquatic Chronic 1 (M = 1 (acute); M = 1 (chronic)) · H362, H400, H410
- GHS pictograms
- GHS09
- Transport classification (pure substance)
- UN 3077, class 9, packing group III, marine pollutant
- HS code (EU customs)
- 2933.19 (active ingredient) · 3808.92 (formulations)
- FAO specification
- No FAO specification published
Sources: EU CLP Regulation Annex VI (ECHA), section 14 of the safety data sheet, the EU customs nomenclature and the FAO/WHO JMPS specifications. Each formulation is shipped under the classification in its own safety data sheet.
Packaging and supply terms
- Technical material
- 25 kg fibre drums or woven bags with liner; liquid technical material in 200 L drums
- Liquid formulations
- 100 mL to 1 L bottles; 5, 10 and 20 L jerrycans; 200 L drums and 1,000 L IBC for bulk supply
- Minimum order
- Formulations from 1,000 L or 1,000 kg per specification; technical material from 1,000 kg. Smaller quantities for samples and registration trials.
- Lead time
- Usually 25 to 40 days after order confirmation and label approval.
- Shipping terms
- FOB, CFR or CIF from a Chinese port; dangerous goods packed and documented to the IMDG Code.
- Payment
- T/T or irrevocable letter of credit at sight.
Private label packs in other sizes, with the label language and artwork of the destination market, are made to order. Each quotation confirms the terms of that order.
Mode of action & use
Mode of action
Inhibits succinate dehydrogenase (mitochondrial complex II), cutting off energy supply in the fungal cell.
Systemic and translaminar: moves within the plant and through the leaf.
Typical targets and crops
Leaf spots, rusts, powdery mildew, Sclerotinia and other ascomycete and basidiomycete diseases in cereals, soybean, corn, fruit and vegetables; also used as a seed treatment.
Resistance management · FRAC 7
Succinate dehydrogenase inhibitors (SDHI) carry a medium to high resistance risk. Use them in mixtures with effective partners from other groups and limit the number of SDHI applications per crop and season.
This is general information on the active ingredient. Registered crops, targets, rates and preharvest intervals follow the label approved in each market.
Technical documents
Huasheng provides the following documents for the specification and batch you buy.
- Product specification: composition, concentration, formulation, quality limits and test methods.
- Batch certificate of analysis (COA): measured results for the supplied batch.
- Safety data sheet (SDS): the current version for the formulation supplied.
- Label and packaging documents: proposed label, pack specification, storage requirements and any documents required for registration in the target market.
Buying questions
- Which documents come with fluxapyroxad?
- Every shipment comes with the product specification, a batch certificate of analysis (COA) and the safety data sheet (SDS). Label and packaging documents for the destination market are provided on request.
- Can fluxapyroxad be supplied under our own brand?
- Yes. Huasheng supplies OEM private label packaging, with label language, artwork and pack sizes agreed with you.
- Can Huasheng support registration of fluxapyroxad in our country?
- Yes. Huasheng has taken part in more than 200 product registrations and supports dossier preparation, trial coordination and submission follow up. Registration requirements and approved uses differ by country.
- Can we get a sample of fluxapyroxad first?
- Yes. Huasheng arranges samples for evaluation and local trials, and ships more than 1,500 crop protection samples a year.
- What is the minimum order and lead time for fluxapyroxad?
- Formulations are supplied from 1,000 L or 1,000 kg per specification and technical material from 1,000 kg. Lead time is usually 25 to 40 days after order confirmation and label approval, quoted FOB, CFR or CIF from a Chinese port.
HUASHENG BIO
Talk to us about products and partnerships
Contact Huasheng about products, technology development or partnerships.